Orion AM newshttps://www.orion-am.com/blog/12023-07-20T12:40:34ZContinuous Carbon Fiber 3D Printing:https://www.orion-am.com/blog/orion-am-news-1/continuous-carbon-fiber-3d-printing-19Adam RumjahnBy Adam Rumjahn of Orion Additive Manufacturing GmbH & Lennart Zeller of Technische Universität Berlin Introduction The field of 3D printing has witnessed significant advancements in recent years, wit...2023-07-20T12:40:34ZValidating Orion AM's Thermal Radiation Heating Technology:https://www.orion-am.com/blog/orion-am-news-1/validating-orion-am-s-thermal-radiation-heating-technology-18Adam RumjahnIntroduction 3D printing, specifically Fused Filament Fabrication (FFF) or Fused Deposition Modeling (FDM), is gaining traction in various industries due to its affordability, flexibility, and wide ra...2023-07-17T14:36:51ZOrion AM Touches the Moonhttps://www.orion-am.com/blog/orion-am-news-1/orion-am-touches-the-moon-17Adam RumjahnThe Rashid rover. Image credit: ESA/Mohammed Bin Rashid Space Centre Disclaimer: The views expressed herein by the authors in no way reflect the official opinion of the European Space Agency. Berlin, ...2023-01-27T17:55:59Z3D-Printed PEEK stronger than injection-molding opens new possibilities for implantshttps://www.orion-am.com/blog/orion-am-news-1/3d-printed-peek-stronger-than-injection-molding-opens-new-possibilities-for-implants-16Adam RumjahnCham, CH, October 2022. New and promising manufacturing methods such as 3D printing of PEEK implants must be able to compare with conventional processes like injection molding and milling. Only if res...2022-10-18T19:36:07Z3D printing PEEK stronger than injection molding?https://www.orion-am.com/blog/orion-am-news-1/3d-printing-peek-stronger-than-injection-molding-12Adam RumjahnDespite the 30+ year history of Additive Manufacturing (AM), extrusion-based Fused-Filament Fabrication (FFF) 3D printing of thermoplastics has been limited to mostly producing prototypes or mockups o...2022-09-21T09:15:04ZFrom Traditional Manufacturing to Additive Manufacturinghttps://www.orion-am.com/blog/orion-am-news-1/from-traditional-manufacturing-to-additive-manufacturing-11Caitlyn VergaraHow Orion AM is challenging the manufacturing industry with its 3D printed technology to produce end-use parts with comparable strength to CNC machining and injection molding. What would you gain if y...2021-09-11T07:31:13ZFrom Outer Space to Deep Seahttps://www.orion-am.com/blog/orion-am-news-1/from-outer-space-to-deep-sea-9Adam RumjahnAs Orion AM rolls out its A150 industrial 3D printer, we’re reflecting on the solutions it has contributed to solving the various tough problems not only in outer space but also in deep waters. @ Moni...2021-08-16T19:37:50ZOrion AM A150: A 3D Printer for Spacehttps://www.orion-am.com/blog/orion-am-news-1/orion-am-a150-a-3d-printer-for-space-8David Alonso Illera VillacisDownload Full Press Release here Disclaimer: The views expressed herein by the authors in no way reflect the official opinion of the European Space Agency. Orion Additive Manufacturing, a Berlin based...2021-08-03T10:47:07ZAdditive Manufacturing of CubeSats using High-Performance Polymers: Reduce Mass Budget by Up to 50%https://www.orion-am.com/blog/orion-am-news-1/additive-manufacturing-of-cubesats-using-high-performance-polymers-reduce-mass-budget-by-up-to-50-7Marien Wolthuis, Caitlyn VergaraAbstract At the annual 5th European Space Agency CubeSat Industry Day, Orion Additive Manufacturing GmbH presented its ground-breaking technology for the use of high-performance polymers in 3D printin...2021-07-19T13:25:31ZMTC's design methods for additive manufacturing 3D printinghttps://www.orion-am.com/blog/orion-am-news-1/mtc-s-design-methods-for-additive-manufacturing-3d-printing-6David Alonso Illera VillacisProject Orion AM worked with MTC under the AMable consortium to perform a Design for Additive Manufacturing (DfAM) review of an underwater camera housing. The design showed below was the design propos...2021-03-19T11:51:59ZOrion AM's Thermal Radiation Heating Technologyhttps://www.orion-am.com/blog/orion-am-news-1/orion-am-s-thermal-radiation-heating-technology-5David Alonso Illera VillacisObjectives One of the work goals for TNO is to accomplish and establish mechanical properties of specimens that are printed by Orion. Their second goal is that every specimen manufactured by Orion, ha...2021-03-17T16:08:29Z3D Printed PEEK Cubesatshttps://www.orion-am.com/blog/orion-am-news-1/3d-printed-peek-cubesats-4David Alonso Illera VillacisCubesats Description: Cubesats are miniature satellites that are used in space research, its frames are created from aluminum. Cubesats are built at a small amount, highly customized and are costly. S...2021-03-17T13:49:50ZAdditive Manufacturing of Watertight Partshttps://www.orion-am.com/blog/orion-am-news-1/additive-manufacturing-of-watertight-parts-3David Alonso Illera VillacisNon-Invasive Monitoring of Aquaculture Systems Through the help of the AMable consortium Orion AM has developed a 3D printed underwater camera housing for MonitorFish. Orion AM used its proprietary Th...2021-03-16T16:29:37ZPlaying Catch-uphttps://www.orion-am.com/blog/orion-am-news-1/playing-catch-up-2Marien WolthuisIt has become quite common to use 3D printing to produce low-volume or experimental plastic components. However, this is mostly limited to lower-grade plastics or test parts, which are later going to ...2021-03-16T15:28:36ZIndustrial Additive Manufacturing with Aerospace-Grade materialshttps://www.orion-am.com/blog/orion-am-news-1/industrial-additive-manufacturing-with-aerospace-grade-materials-1David Alonso Illera VillacisWe had the opportunity to exhibit at the IDTechEx 2019 Show in Berlin to show why Orion AM's technology is better at 3D printing with high-performance polymers like PEEK. Orion's patent-pending techno...2021-03-16T12:07:08Z